 |
Is built to give whole-house efficiency. It can soften up to 24 meq/L and reduce up to 10 ppm (parts per million) of ferrous iron, and filter dirt and sediment. This model is the solution for over 95% of all hard water conditions.
- Offers whole-house softening.
- It can reduce clear water iron up to 10 ppm.
- There is a built-in, self-cleaning whole-house filter meaning that there are no cartridges to change.
- Made in the USA.
 Regeneration
Takes 18 minutes and uses only 16 gallons of water for the regeneration process.
In addition, 2.5 pounds of salt are needed for regeneration.
|
Max. compensated hardness -
70 grains per gallon (gpg)
Salt or salt substitute used
per regeneration - 2.5 lbs.
Length of regeneration -
18 minutes
Water used per regeneration -
16 gallons
Plumbing connections - 3/4" NPT
(*1" NPT also available)
Salt storage capacity - 105 lbs.
Max. water temperature -
120 degrees fahrenheit
Water pressure
(min./max. PSI) - 20-120 PSI
Footprint (WxD) -
14 3/4" x 18 3/4"
Height - 25 3/4"
|
